Ranger Spare Parts

Tote bag

Tote bag

In stock


Bag roomy enough for the Ranger trap, shield and lighting rig. Can also be used to carry or store many of our other products including all our butterfly and hanging traps.

Made of breathable geotextile, with full width zip and removable webbing carry strap. Approx 18.5" (47cm) wide x 20" (50cm) long.


Price: £10.40 (12.48 Including VAT at 20%)

Quantity:

Tent pegs

Tent pegs

In stock


Two sturdy tent pegs which can be used to ground tether our tent cage or moth traps.

Please note, product may vary in style from that illustrated.


Price: £0.75 (0.90 Including VAT at 20%)

Quantity:

Ranger base unit

Ranger base unit

In stock


Standard Ranger net base unit. Uses 25cm legs - not included.

NOTE: If you are replacing an existing Ranger base unit and already have the base unit legs, please check the leg length before re-ordering. Most models prior to 2012 use 22.5cm legs which you will need to replace if buying a new Ranger® base unit.

Photograph for illustration purposes only - base unit legs not included.


Price: £30.00 (36.00 Including VAT at 20%)

Quantity:

Base unit legs -  25cm

Base unit legs - 25cm

In stock


2 x threaded rod legs with notched tips to fit Ranger or Safari base

Standard length rods with threaded bar length of 25cm (approx 26cm including notched tips) to fit most traps sold from 2012 onwards. PLEASE CHECK LEG LENGTH BEFORE PURCHASING.


Price: £3.60 (4.32 Including VAT at 20%)

Quantity:

Base unit legs - 22.5cm

Base unit legs - 22.5cm

In stock


2 x threaded rod legs with notched tips to fit Ranger or Safari base

Old length rods with threaded bar length of 22.5cm (approx 23.5cm including notched tips) to fit all traps sold prior to 2012, and some 2012 models. PLEASE CHECK LEG LENGTH BEFORE PURCHASING.


Price: £3.00 (3.60 Including VAT at 20%)

Quantity:

Ranger multi cone R1-LN

Ranger multi cone R1-LN

In stock


Cone to fit any Ranger base, aperture 2.5" (6cm) length c. 6" (15cm). Suits ES fitting lamps, actinic straight tubes (vertically mounted, optional steady bar required), actinic circline tubes, and vane units.

Either buy just the cloth cone and central fittings (cloth cone, 1 x 4" lampholder, 1 x base ring) Or buy the cloth cone, central fittings and shaper bar set for a small additional charge (cloth cone, 1 x 4" lampholder, 1 x base ring, plus 4x shaper bars, 4x screws, 4 x nuts - as pictured)

For more detail please see our main Ranger page HERE


Price: £20.00 (24.00 Including VAT at 20%)

Quantity:

Do you need shaper bars ?
No shaper bars (+0.00) Shaper bar set included (+1.70)

Ranger multi cone R1-SW

Ranger multi cone R1-SW

In stock


Cone to fit any Ranger base, aperture 4" (10cm, length c. 4" (10cm). Suits ES fitting lamps, actinic straight tubes (vertically mounted, optional steady bar required), actinic circline tubes, and vane units.

Either buy just the cloth cone and central fittings (cloth cone, 1 x 4" lampholder)
Or buy the cloth cone, central fittings and shaper bar set for a small additional charge (cloth cone, 1 x 4" lampholder, plus 4x shaper bars, 4x screws, 4 x nuts - as pictured)

For more detail please see our main Ranger page HERE


Price: £16.00 (19.20 Including VAT at 20%)

Quantity:

Do you need shaper bars ?
No shaper bars (+0.00) Shaper bar set included (+1.70)

Ranger plain cone R2-LN

Ranger plain cone R2-LN

In stock


Cone to fit any Ranger base, aperture 2.5" (6cm), length c. 6" (15cm). Suits ES fitting lamps, actinic straight tubes (vertically mounted, optional steady bar required), and vane units.

Either buy just the cloth cone and central fittings (cloth cone, 1 x 4" lampholder, 1 x base ring)
Or buy the cloth cone, central fittings and shaper bar set for a small additional charge (cloth cone, 1 x 4" lampholder, 1 x base ring, plus 4x shaper bars, 4x screws, 4 x nuts - as pictured)

For more detail please see our main Ranger page HERE


Price: £18.50 (22.20 Including VAT at 20%)

Quantity:

Do you need shaper bars ?
No shaper bars (+0.00) Shaper bar set included (+1.70)

Ranger plain cone R2-SW

Ranger plain cone R2-SW

In stock


Cone to fit any Ranger base, aperture 4" (10cm), length c. 4" (10cm). Suits ES fitting lamps, actinic straight tubes (vertically mounted, optional steady bar required), and vane units.

Either buy just the cloth cone and central fittings (cloth cone, 1 x 4" lampholder)
Or buy the cloth cone, central fittings and shaper bar set for a small additional charge (cloth cone, 1 x 4" lampholder, plus 4x shaper bars, 4x screws, 4 x nuts - as pictured)

For more detail please see our main Ranger page HERE


Price: £14.75 (17.70 Including VAT at 20%)

Quantity:

Do you need shaper bars ?
No shaper bars (+0.00) Shaper bar set included (+1.70)

Ranger hook 'n' loop cone R3-LN

Ranger hook 'n' loop cone R3-LN

In stock


Cone to fit any Ranger base, standard aperture 2.5" (6cm), length c. 6" (15cm). Suits actinic circline tubes, and vane units.

Either buy just the cloth cone and central fittings (cloth cone, 1 x base ring)
Or buy the cloth cone, central fittings and shaper bar set for a small additional charge (cloth cone, 1 x base ring, plus 4x shaper bars, 4x screws, 4 x nuts - as pictured)

For more detail please see our main Ranger page HERE


Price: £15.50 (18.60 Including VAT at 20%)

Quantity:

Do you need shaper bars ?
No shaper bars (+0.00) Shaper bar set included (+1.70)

Ranger hook 'n' loop cone R3-SW

Ranger hook 'n' loop cone R3-SW

In stock


Cone to fit any Ranger base, cone aperture 4" (10cm), length c. 4" (10cm). Suits actinic circline tubes, and vane units.

Either buy just the cloth cone and central fittings (cloth cone, 1 x base ring)
Or buy the cloth cone, central fittings and shaper bar set for a small additional charge (cloth cone, 1 x base ring, plus 4x shaper bars, 4x screws, 4 x nuts - as pictured)

For more detail please see our main Ranger page HERE


Price: £15.40 (18.48 Including VAT at 20%)

Quantity:

Do you need shaper bars ?
No shaper bars (+0.00) Shaper bar set included (+1.70)

Cone shaper bars

Cone shaper bars

In stock


Set of 2 spare Ranger cone shaper bars excluding fittings as illustrated. If you need a complete set of shaper bars, you will need to buy two packs (4 bars).

Fittings, 2 x 16mm screws and 2x nuts, can be added free of charge by selecting the correct option below.


Price: £2.00 (2.40 Including VAT at 20%)

Quantity:

Do you need fittings ?
  • No fittings   
  • Fittings included   

Lampholder fitting-ring

Lampholder fitting-ring

In stock


4" (10cm) 38mm lampholder fitting-ring which will fit the following:

Safari
Ranger multi R1-LN and R1-SW
Ranger ES R2-LN and R2-SW
Ranger circline R3-S


Price: £3.00 (3.60 Including VAT at 20%)

Quantity:

Small silver ring

Small silver ring

In stock


2.25" (6cm) 38mm lampholder fitting-ring which will fit the following:

Ranger multi R1-LN
Ranger ES R2-LN
Ranger circline R3-LN


Price: £1.00 (1.20 Including VAT at 20%)

Quantity:

Ranger rainshield

Ranger rainshield

In stock


This is for the clear plastic shield only. Please note that the rainshields not suitable for use with the Safari trap. Photograph shows rainshield with protective opaque cover, which is removed before use.


Price: £12.65 (15.18 Including VAT at 20%)

Quantity:

Rainshield legs

Rainshield legs

In stock


Set of 2 spare Ranger rainshield legs including all fittings as illustrated.
If you need a complete set of legs for a rainshield, you will need to buy two packs (4 legs).


Price: £3.65 (4.38 Including VAT at 20%)

Quantity:

Fixings

Fixings

In stock

A variety of fittings can be chosen here. Each pack contains two of your chosen item. All fittings are M6 size and will fit each other - so for example the screws will fit through the washers and into the anchor or nut. First select the item you want by clicking on the buttons below. Then amend the quantity if necessary and add to cart.

For example selecting "Anchors" and adding "1" to your basket will result in you being sent two anchors.

Quantity:


16mm long philips screws x 2 (+0.30) 12mm long philips screws x 2 (+0.30) 10mm long round headed screws x 2 (+0.30)
Anchors x 2 (+0.60) Nuts x 2 (+0.30) Washers x 2 (+0.30)

Ranger steady bar

Ranger steady bar

In stock


Single steady bar and hole blanking plug to attach to your existing Ranger® multi or ES cone, plus one spare nut and 16mm screw.

Photograph for illustration purposes only - lamp, cone & ranger base not included


Price: £3.60 (4.32 Including VAT at 20%)

Quantity:

Ranger double steady bar

Ranger double steady bar

In stock


2 x steady bars, 2 extender rods with anchors and hole blanking plug to attach to your existing Ranger® multi or ES cone, plus one spare nut and 16mm screw.

Photograph for illustration purposes only - lamp, cone & ranger base not included


Price: £6.90 (8.28 Including VAT at 20%)

Quantity: